The Flex II Controller and Flex II Expander have the same dimensions
FlashReader
FlashReader Keypad
The following chart and drawings contain dimensional information that may be needed for mounting the legacy CyberLock Flex System Modules and fabricating mounting plates. In most cases it is assumed that modules will mount to a metal mounting plate (not shown) using the gasket plus the retaining nut with set screw that ships with each module. When tightening the retaining nut it is desireable to align the set screw with the keyway in the module so the screw may be captured and prevent the nut from turning.
| Feature | Large diameter module Weatherized Vault |
Small diameter module RFID Reader |
| Overall Diameter | 3 inches (Item A in the dimension drawing | 2 inches |
| Hole diameter | 2.647 inches (Item B) | 1.77 inches |
| Retaining nut diameter | 3 inches (Item C) | 2 inches |
| Retaining nut thickness | 0.50 inches (Item D) | 0.75 inches |
| Retaining nut set screws | #3 Phillips screw driver recommended | #2 Phillips screw driver |
| Recommended depth behind gasket (includes clearance for RS-485 connection cable) |
3.25 inches | Data Knob - 3.00 inches RFID - 2.00 inches Display - 1.50 inches |
Hole dimension for small diameter modules
Hole dimension for large diameter modules
