Behind the Vault 20S Keypad/Card Reader Panel

The Vault 20S Keypad/Card Reader panel may be opened to gain access to the internal server. This enables connecting network and display cables and inserting or removing USB devices.

Use a CyberKey to unlock the panel CyberLock.
	(1) Swing the panel out and (2) slide it to the left to disengage it from the vault chassis.
The panel may then be flipped back-side forward and placed on top of the cabinet.

Connect the Ethernet cable - Feed the Ethernet cable through the back of the cabinet. Connect it to the Ethernet port as shown.

Connect an HDMI cable for a display - Feed the display cable or adapter through the back of the cabinet. Connect it to one of the two HDMI ports as shown.

Remove the USB Wireless Adapter - To remove the ability to connect to the V20S wirelessly, simply unplug the wireless adapter from the USB port.

Connect a USB drive to change network settings - This operation may be done without fully removing the panel. Open the panel just enough to access the single USB port that faces the cabinet CyberLock.