WebStation 2 Audit Trails
| # | Event | Description |
|---|---|---|
| 700 | Valid key inserted | An issued key was inserted into the WebStation 2 |
| 701 | Invalid key inserted | A key was inserted which was not issued to a person. This could include CyberKeys on a mission, a CyberLock Programmer, a Grand Master, a key belonging to a CyberKey Vault or an obsolete model of CyberKey. |
| 702 | Key Out | A CyberKey was removed from the WebStation 2 keyport |
| 703 | Key disabled | The WebStation 2 cleared the settings from the CyberKey |
| 704 | Key comm failed | Communications between the CyberKey and the CyberAudit-Web server were interrupted by removal from the WebStation 2 keyport or from an error. |
| 705 | Key downloaded | The audit trail events from the key were captured by the server |
| 706 | Key configured | The WebStation 2 programmed the key with the latest configuration from the CyberAudit-Web server. |
| 707 | No PIN Input | The WebStation 2 cannot program a CyberKey because a PIN is required to program it. The requirement for a PIN may be bypassed for WebStations in subsystem preferences. |
| 709 | Key firmware updated | The WebStation 2 successfully updated a CyberKey's firmware |
| 711 | Station connected and ready | The WebStation 2 powered up or restarted and successfully connected to its CyberAudit-Web server. |
| 712 | Station settings updated | The settings of the WebStation 2 have been updated either online or via CyberLink 2 or CyberAudit Link. |
| 713 | Station firmware updated | The WebStation 2 firmware was updated either online or via CyberLink 2 or CyberAudit Link. |
