CyberKey Cleaning Instructions
| Visually inspect inside the key tip for foreign material like lint or dirt. If present, use a toothpick or other
small tool to remove the material. The key tip metal housing can be removed to better expose the contact pins. Clean the
contact pins using the stainless steel brush (part number BRUSH). If the tip is removed, make sure to reinstall the
insulator and tighten the screw. DO NOT overtighten.
Warning: Do not use cleaners or other liquids when cleaning a CyberKey. |
 Clean pins with brush. |
| If these procedures fail to provide satisfactory results, please contact your CyberLock vendor. |  Clean pins. |
